The installation method of solar LED street lamp is very important. The correct method is to refer to the street lamp installation code. It is also necessary to combine the specific situation of the installation site to develop a correct and reasonable solar LED street lamp installation method. Installation errors can occur by installers who lack the expertise.
Before installing solar street lights, determine the position of the standing lamp; According to the geological survey, if the surface 1m 2 soft soil, should deepen the excavation depth; At the same time, make sure that there are no other facilities (such as cables and pipelines) below the excavation location, and that there is no long-term shelter on the top of the street lamp. Otherwise, the position should be appropriately changed. Reserve (excavate) a pit of 1m 3 in line with the standard at the position of the vertical lamp; Position and pour the embedded parts. The embedded part is placed in the middle of the square pit, one end of the PVC threading pipe is placed in the middle of the embedded part, and the other end is placed in the storage location of the battery (only used for embedding the battery). Take care to keep the embedded parts and foundation at the same level as the original ground (or the top of the screw at the same level as the original ground, depending on the needs of the site), and one side should be parallel to the road; This ensures that the lamp post is upright without deflection. The C20 concrete is then poured and fixed. During the casting process, the vibrator shall not be stopped to ensure the overall compactness and firmness. After the construction, it should be cleaned up in time.
The correct installation method of solar street lamp:
1. Installation position of solar street lamp
Solar energy is the first key to street lamp location, so solar energy is the most important thing to pay attention to in the process of street lamp installation. At the installation site, check whether there are obstacles and surrounding obstacles, such as foundations, trees, and high-rise buildings, that may affect lighting. Do not install them in backlit areas.
2. Basic components of solar street lamps.
Size and solidity of solar street lamp base. Whether the foundation is firm or not directly affects the safety of the lamp pole. Therefore, the foundation must be operated in strict accordance with the construction drawings, and important data such as size and material must be mastered. Soil texture around the base of solar street lamps. This is also closely related to the safety of light poles. The soil around the foundation should have low moisture and high strength to prevent unsafe behavior such as thrust tilt of the light pole. Position and finish of thread hole of solar street lamp base (for buried battery only). The function of the wire hole is to lead the battery wire from the ground to the light pole. If the thread hole is offset, the thread hole will be blocked when installing the lamp post. If there is a foreign object or knot in the threaded hole, the threaded hole will be completely blocked. In both cases, the battery line cannot be introduced, leaving the lamp without an effective power source.
3. Thread part of solar lamp.
Solar street lamp in the process of threading, the pole is absolutely not allowed to have a wire connector, all the connection line must be a complete line. (In addition to some light sources with their own leads, the lamp and the light source line in the lamp pole connection, pay attention to close connection, waterproof and leakproof, connection pay attention to prevent the lamp due to gravity and fall off). Be careful how you thread the thread. It is strictly prohibited to pull hard to prevent electrical leakage caused by wire interruption or insulation layer rupture.
4. Install LED street light source and solar panel.
The main issues that need attention are the fastness of the power cord connection and the fastening of the screws. All wires must be connected to prevent falling off and leaking, and the connection must be tight and beautiful. In the process of tightening the screw, the tightness should be controlled, not too loose or too tight. Follow the tightening rules and move appropriately. Do not screw too tightly, so as not to screw due to excessive force and slide; Not too loose, lest some parts loose and shift. When installing an indicator board, guide it in the right direction. The standard time plate faces south, where the light is strongest and the sun lasts the longest. If you cannot face south under special circumstances, the principle of maximum illumination time and maximum illumination intensity should be adopted.
5. Install solar lamp poles.
Before installing a solar lamp pole, be sure to check all power cables for leakage. If so, please correct it as soon as possible. Pay attention to safety when you erect the pole. Adjust the direction of the light post while tightening the screws. Flatten, don't tilt back and forth. When all the work is done, the anchor screws must be tightened again to keep them secure.
Misconceptions about solar street lamp installation:
1. It should be installed in places with more obstacles.
Solar street lamps work by solar panels absorbing the sun during the day and storing it in batteries. At night, the battery will convert sunlight into electricity to power the street lights. Then the lights came on. But then again, solar panels can only store electricity by absorbing sunlight. If street lights are installed where there are many obstructions, such as many trees or buildings, they do not absorb sunlight and therefore do not light up or dim.
2. Install near other light sources.
Solar street lights have their own control system that can recognize dawn and darkness. If other power sources are installed next to solar street lights, when the other power sources are turned on, the solar street light system will be considered daytime and will not be turned on at this time.
3. Solar panels are installed under other shelters.
A solar panel is made up of multiple panels. If one of the panels isn't exposed to sunlight for a long period of time, the battery won't work. Similarly, if solar street lights are installed in one place, there will be a shelter covering an area of solar panels. If the area is not exposed to sunlight for a long time, the sunlight cannot be converted into electricity, and the battery in the area is equivalent to a short circuit.
4. Install lamps on both sides of the road, with solar panels tilted face to face.
Installing lights on the sides of the road should be common, but there will also be the problem that the sun only rises in the east. If the street light on one side is facing east and the street light on the other side is facing west, one side may be facing away from the sun and therefore unable to absorb sunlight due to the wrong orientation. The correct installation method is that the solar panels face the same direction and the solar panels on either side can absorb sunlight.
5. Solar street lights are charged indoors.
Because of the convenience of lighting, Cheng Ye Lighting solar street lamp manufacturers installed in sheds or other indoor Spaces. However, if installed indoors, solar street lights will not work because their panels are completely blocked and cannot absorb sunlight. No sunlight can be converted into electricity, nor can it be illuminated. For indoor solar street lights, separate solar panels and lamps can be installed so that the panels can be charged outside and the lamps can be lit inside. Of course, if we are lighting inside, we can also choose other lighting.
扫一扫添加微信